Hi guys
I have a 2.2kw air cooled spindle and all my electronics running through a pmdx 126 controlled by mach3 using big Tex blue screen. OK now it all works fairly well but my setup means I have to connect a clip to the router bit and it lowers down to the touch plate, now the problem I have is that in between tool changes it takes off with my clip attached so my question is how do I set it up without having to put a clip on the router bit like what's shown in his videos. When I touch the touch plate to the router bit without the clip attached the green light in mach3 flashes intermittently like its not stable .
Chris
Results 1 to 2 of 2
-
11-27-2014, 07:44 AM #1
Member
- Join Date
- Jul 2010
- Posts
- 159
Help!!! Touch probe grounding through spindle???
-
11-28-2014, 10:21 PM #2
Member
- Join Date
- Jul 2010
- Posts
- 159
Re: Help!!! Touch probe grounding through spindle???
Anyone have any suggestions?
Reply With QuoteSimilar Threads
-
Touch Plate Grounding to 110V / 220V
By Quada in forum CNC Machine Related ElectronicsReplies: 11Last Post: 09-16-2014, 04:18 AM -
3D touch probe
By bschwand in forum MetalWork DiscussionReplies: 18Last Post: 12-26-2013, 10:06 PM -
NO Touch Plate and NC Touch Probe switch inversion using an Arduino UNO
By Kenny Duval in forum Benchtop MachinesReplies: 12Last Post: 06-05-2013, 06:05 PM -
cnc touch probe
By shawnc515 in forum Uncategorised MetalWorking MachinesReplies: 0Last Post: 09-30-2010, 11:10 PM -
touch probe
By basswakr in forum CNC Machine Related ElectronicsReplies: 0Last Post: 08-14-2010, 02:18 PM
Tags for this Thread
Posting Permissions
