Hello, I recently bought Biesse Rover 13 ; 1996 with NC 400 plus controller. I have never used a machine like this and I need some help starting it. The machine is plugged in the power circuit, it has air connected(7 BAR; 700 l/min). All transporting brackets have been removed.
There’s a small air leak from the part, shown at picture №1 or №2. I cannot stop the leak.
The machine is in a foreign language so if someone could help me change it to English that would be great.
There’s an error on the screen but I cannot find what’s it for – it says error " ECN_13-Axe en Alar " .
Drill head does not want to go in any direction and we don't know how to make her go in the 0 possition, it's in the middle of the working area now.
We don't know how to calibrate the machine.
Please help.