585,722 active members*
4,280 visitors online*
Register for free
Login
Results 1 to 4 of 4
  1. #1
    Join Date
    Sep 2005
    Posts
    249

    Conversation wizards...

    I bought the license, but it still says that I need a special liscense to get the conversational wizards. What else do I need to buy to get those? That was one of the big things that convinced me to get it.

  2. #2
    Join Date
    Jul 2006
    Posts
    1062
    The conversational wizards are an addon...Cheap enough and very handy imho I believe that they are around $50 ish I bought them seperate but if you buy the mach and wizards from newfangled...WE could have saved a few $'s
    Keith

  3. #3
    Join Date
    Sep 2006
    Posts
    4
    hey william ,i know , i asked the same question to art ,,but you know its still good value ,they must have put years into mach3 ,and possibly the same with the wizards , im still waiting for my BOB board which is on its way so i can get my series 1 bridgeport hooked up and running , hey maybe ill change my mind anout the wizards and mach3 ,ha ha , we shall see ,no really its no an expensive package is it ..

  4. #4
    Join Date
    Mar 2003
    Posts
    35538
    The Newfangled wizards were developed by a third party. They are included with mach3 as demo's.
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •