I recently bought a 1996 Daewoo Puma6 with a Mitsubishi control. No matter what I put in the G76 it only makes one pass for the threading command. Is there a setting in the macro that is causing this?
Results 1 to 1 of 1
-
12-03-2014, 04:24 PM #1
Registered
- Join Date
- Oct 2011
- Posts
- 7
1996 Daewoo Puma 6 threading one pass
Reply With QuoteSimilar Threads
-
G76 Threading = 1 pass = problem
By HRWmfg in forum Hardinge LathesReplies: 2Last Post: 02-16-2013, 01:57 AM -
Daewoo puma 10s
By bbf468 in forum Daewoo/DoosanReplies: 5Last Post: 02-17-2012, 01:33 AM -
Daewoo Puma 6 with 3tf
By mmxmb in forum Daewoo/DoosanReplies: 1Last Post: 04-06-2011, 01:36 PM -
Daewoo Puma 10
By Danny in forum Daewoo/DoosanReplies: 5Last Post: 02-04-2011, 11:08 PM -
One clean up pass after threading…T32B
By Captdave in forum Mazak, Mitsubishi, MazatrolReplies: 2Last Post: 09-09-2009, 03:55 PM
Tags for this Thread
Posting Permissions
