[cdoss]

I need some advice on how to sequence a 30" x 30" square part on an Amada Vipros with part unload automation. I can't seem to be able to sequence the part to eliminate steps as the part cuts out. I can sequence the part to cut out and unload, but I think the way it is sequenced is where I need help. Anybody with some experience with this that can help?

Thanks in advance for any and all advice!

[erickortiz]

hi.

If you are using FabriWin Version 10 just go to Punch Sequence Menu and select Add (you need to asign the tools first)

Select Add

Attachment 260158



Just add the sequence

Attachment 260160

[enara]

I am looking for driver for Amada 357 Queen turret press
with a Fanuc 18P control. I am programming with Fabriwin 6.
If I need to pay, no problem.






QUOTE=erickortiz;1608480]hi.

If you are using FabriWin Version 10 just go to Punch Sequence Menu and select Add (you need to asign the tools first)

Select Add

Attachment 260158



Just add the sequence

Attachment 260160[/QUOTE]