4 Axis EPS CNC Router for Large Foam/Wooden Moulds is In production
Attachment 259416Attachment 259418Attachment 259420
4 Axis EPS CNC Router with working area 2600x4000x1000mm, the spindle of the machine could rotate +/- 90 degree, very suitable for side drilling/milling/cutting/Large foam & wooden Making.
Results 1 to 1 of 1
-
12-04-2014, 07:31 AM #1
Registered
- Join Date
- Nov 2014
- Posts
- 57
4 Axis EPS CNC Router for Large Foam/Wooden Moulds is In production
Reply With QuoteSimilar Threads
-
Wooden CNC Router Y-axis problems
By NobelO in forum DIY CNC Router Table MachinesReplies: 7Last Post: 07-19-2014, 06:43 PM -
Looking to Outsource Production of Small Wooden Piece
By Afghaniland in forum Want To Buy...Need help!Replies: 0Last Post: 02-28-2014, 07:48 PM -
5 Axis Router for PE Foam
By PJBKK in forum Want To Buy...Need help!Replies: 2Last Post: 10-19-2012, 03:05 PM -
New Design - Hybrid 3-Axis Router/4-axis Foam Hot Wire Cutter
By the__extreme in forum CNC Wood Router Project LogReplies: 3Last Post: 02-26-2007, 09:58 PM -
large 4x8 router for cutting foam boat plugs
By waterboy in forum DIY CNC Router Table MachinesReplies: 15Last Post: 02-09-2005, 04:59 PM
Tags for this Thread
Posting Permissions
