584,849 active members*
4,035 visitors online*
Register for free
Login
Results 1 to 4 of 4
  1. #1
    Join Date
    Jul 2004
    Posts
    601

    Conversion blues

    What can I do to get a 2d drawing from alibre to a format sheetcam can use?

    Sorry if this has already been posted, but I've spent over an hour searching!!!
    On all equipment there are 2 levers...
    Lever "A", and Lever F'in "B"

  2. #2
    Join Date
    Jul 2005
    Posts
    442
    You should be able to export in DXF format.

    If your version cannot export to DXF, I can convert it for you if you're willing to send the file.

    Aaron

  3. #3
    Join Date
    Mar 2003
    Posts
    35538
    File>New drawing. Choose your part. Choose Blank drawing. Set the orientation to get the side of the part you want. File>Export.
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

  4. #4
    Join Date
    Jul 2004
    Posts
    601
    Thanks Gerry, I didn't know about the drawing part of this software. I guess I need to finish the tutorials!

    Carl
    On all equipment there are 2 levers...
    Lever "A", and Lever F'in "B"

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •