What can I do to get a 2d drawing from alibre to a format sheetcam can use?
Sorry if this has already been posted, but I've spent over an hour searching!!!
What can I do to get a 2d drawing from alibre to a format sheetcam can use?
Sorry if this has already been posted, but I've spent over an hour searching!!!
On all equipment there are 2 levers...
Lever "A", and Lever F'in "B"
You should be able to export in DXF format.
If your version cannot export to DXF, I can convert it for you if you're willing to send the file.
Aaron
File>New drawing. Choose your part. Choose Blank drawing. Set the orientation to get the side of the part you want. File>Export.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Thanks Gerry, I didn't know about the drawing part of this software. I guess I need to finish the tutorials!
Carl
On all equipment there are 2 levers...
Lever "A", and Lever F'in "B"