585,766 active members*
4,548 visitors online*
Register for free
Login
IndustryArena Forum > WoodWorking Machines > DIY CNC Router Table Machines > Avid CNC > Super PID with CNCRP NEMA 23 Enclosure

Thread: Super PID with CNCRP NEMA 23 Enclosure

Results 1 to 1 of 1
  1. 12-06-2014, 05:21 AM #1
    shags0024
    shags0024 is offline
    Join Date
    Dec 2013
    Posts
    7

    Super PID with CNCRP NEMA 23 Enclosure

    I am having a bit of trouble getting my head around the preconfigured nema 23 control box and connecting a super pid controller.
    has any one here done that on here?
    all I have is a gif set by CNCRP of the break out board
    Attached Thumbnails Attached Thumbnails BOB Diagram.jpg  
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Cutting openings on NEMA enclosure
    By FoxCNC1 in forum Open Source CNC Machine Designs
    Replies: 15
    Last Post: 12-10-2013, 03:32 AM
  2. Adjusting Gecko 540 Trimpots on CNCRP 2448 (NEMA 23) RP drive Engaged or Not Engaged
    By ludite53 in forum Gecko Drives
    Replies: 2
    Last Post: 04-07-2013, 04:16 PM
  3. Adjusting Gecko 540 Trimpots on CNCRP 2448 (NEMA 23) RP drive Engaged or Not Engaged
    By ludite53 in forum Gecko Drives
    Replies: 0
    Last Post: 04-07-2013, 01:03 AM
  4. Super PID Enclosure Project
    By msimpson99 in forum DIY CNC Router Table Machines
    Replies: 2
    Last Post: 06-20-2012, 05:53 PM
  5. Nema Enclosure
    By Eurisko in forum DIY CNC Router Table Machines
    Replies: 1
    Last Post: 09-09-2008, 06:38 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules