585,741 active members*
5,175 visitors online*
Register for free
Login
IndustryArena Forum > Laser Engraving and Cutting Machines > Laser Control Software > Communication broken : MPC6535 & York Laser

Thread: Communication broken : MPC6535 & York Laser

Results 1 to 2 of 2
  1. 12-06-2014, 02:38 PM #1
    PlanBLaserIT
    PlanBLaserIT is offline Junior Member
    Join Date
    Dec 2014
    Posts
    2

    Exclamation Communication broken : MPC6535 & York Laser

    Hi Everybody,

    I have a York Laser with a MPC6535 controller card.
    Sometimes when we send files to the laser cutter the following message appears:
    "The communication is broken for timeout. Please close and open the output window to retry"

    Usually we just unplugged and plugged back in the USB cable and everything was fine.
    This time it doesn't work.
    I don't know what to do.

    I've checked the DLL and firmware version but the same message appears and then the 2 versions are completely different.

    What should I do?
    Please help us, I've already written to Leetro but I don't expect to get an answer soon!


    Martina from Italy
    Attached Thumbnails Attached Thumbnails Schermata 2014-12-06 alle 14.20.47.jpg   Schermata 2014-12-06 alle 14.20.55.jpg   Schermata 2014-12-06 alle 14.21.19.jpg  
    Reply With Quote Reply With Quote
  2. 08-08-2018, 08:54 AM #2
    holong98
    holong98 is offline Junior Member
    Join Date
    Jul 2018
    Posts
    4
    I still have this problem in 2018
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules