584,817 active members*
4,899 visitors online*
Register for free
Login
Results 1 to 5 of 5

Hybrid View

  1. #1
    Join Date
    Dec 2014
    Posts
    7

    HAAS Renishaw probe

    Hello, we have an hass vf2ss with a Renishaw 40-20 probe have come in this morning and went to probe a bore and it comes up with a (524 END FOUND WITH NO MATCHING DO) error
    (PROBE-BORE) G65 P9995 W54. A10. D0.5 E0.005 H0.005

    IF [#3001 GT 3000. ] GOT03 (OMP-40 FAIL TO TURN ON AFTER 3 SEC TRY AGAIN) ;
    END1;
    GOTO5 ;
    N4 ;
    #3000= 101 (PROBE START UP FAILURE) ;
    N5 ;
    N999 ;
    G103 ;
    M99 ;
    ;
    ; ? ?
    Not sure what happened was using it yesterday then this morning... this any help please
    thank you
    Greg

  2. #2
    Join Date
    Apr 2005
    Posts
    713

    Re: HAAS Renishaw probe

    First thing to do is replace the batteries.

  3. #3
    Join Date
    Dec 2014
    Posts
    7

    Re: HAAS Renishaw probe

    Sorry for taking so long yes I have replaced the batteries, we are thinking one of our students got in it and deleted the macros we are going to reload all and see if that will work, we also have a call into our Haas service as a last resort hopefully I will be able to get it back up and running
    Thank you for the response back
    Greg

  4. #4
    Join Date
    Dec 2008
    Posts
    3110

    Re: HAAS Renishaw probe

    Quote Originally Posted by gregeryjo View Post
    IF [#3001 GT 3000. ] GOTO3 (OMP-40 FAIL TO TURN ON AFTER 3 SEC TRY AGAIN) ; if correct, jump to N3, Where is N3 ?
    END1;
    GOTO5 ;
    N4 ;
    #3000= 101 (PROBE START UP FAILURE) ;
    N5 ;
    N999 ;
    G103 ;
    M99 ;
    Check your original macros, ... are there any #'s missing ie #3000 or #101 ?

  5. #5
    Join Date
    Feb 2010
    Posts
    1184

    Re: HAAS Renishaw probe

    I would try reloading your Renishaw programs.

    I have never had weak batteries give this type of alarm, but it's an easy thing to do, so go ahead and try that also.

    Good luck!

Similar Threads

  1. Haas VF 3SS w/ Renishaw Probe Systems
    By Cshade30 in forum Haas Mills
    Replies: 7
    Last Post: 12-24-2015, 10:59 AM
  2. Haas VF-5 Renishaw OMP-40 probe
    By dackley05 in forum Haas Mills
    Replies: 9
    Last Post: 08-31-2011, 12:51 PM
  3. Haas Renishaw Probe Macros
    By DaOne in forum Haas Mills
    Replies: 3
    Last Post: 03-12-2011, 06:24 AM
  4. Haas Renishaw Probe
    By Tazzer in forum Haas Mills
    Replies: 17
    Last Post: 07-07-2009, 12:18 AM
  5. Renishaw Probe on Haas VF-1
    By gromit68 in forum Haas Mills
    Replies: 2
    Last Post: 07-15-2007, 03:04 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •