[MAJIDTAERKAZEMY]

Hi Dear
Is there anyone to know about this : ABBRUCH:INT 05 TASK 01 ADD 377:168EH
This message appears on the monitor when switching on my Gildeeister GAC 65 Lathe with Grundig Eltropilot EPP8 -s CNC control .
nothing else appear on montor and the control doesn' t boot..

[Russell840]

Hi Dear
Is there anyone to know about this : ABBRUCH:INT 05 TASK 01 ADD 377:168EH
This message appears on the monitor when switching on my Gildeeister GAC 65 Lathe with Grundig Eltropilot EPP8 -s CNC control .
nothing else appear on montor and the control doesn' t boot..

Hi Sir
Thats Message means is :
" abort : a pice of your system software is corrupted with integer type first task in 377 addres "

unfortunatly I have the same problem on " Gildemeister CTX500 with Grundig Eltropilot L-2 "
can you find the solution?
warm regards

Russell

[Russell840]

The reason was " Machines Parameters was Corrupted" needs to reload and set SPS Switches.