584,837 active members*
5,307 visitors online*
Register for free
Login
Page 14 of 14 4121314
Results 261 to 264 of 264
  1. #261
    Join Date
    Jul 2009
    Posts
    1

    Re: DIY AC Servo Drive - ATMega based

    Hello,,this project success sir?because we want make this driver for controll my cnc,,do you have any idea

  2. #262
    Join Date
    May 2021
    Posts
    2

    Re: DIY AC Servo Drive - ATMega based

    Hi Mihai & all,
    It seems an excellent work Mihai, I want to try it , do you still could share you source code and Eagle pcb.. ,I hope it Not too late .
    I can't access to the link attached ,eany one can help?
    Thanks &regards

  3. #263
    Join Date
    May 2021
    Posts
    2

    Re: DIY AC Servo Drive - ATMega based

    Hi Mihai & all,
    It seems an excellent work Mihai, I want to try it , do you still could share you source code and Eagle pcb.. ,I hope it Not too late .
    I can't access to the link attached ,eany one can help?
    Thanks &regards

  4. #264
    Join Date
    Feb 2013
    Posts
    1

    Re: DIY AC Servo Drive - ATMega based

    Hello,

    I have make this pcb with the atmega644 and try to test to firmware 1.4 and 1.5. I upload the hex and the eprom file via avrdudess and try to communicate with the bord via FT232.
    The wiring i supose GND->GND and RX->TX and TX ->RX from the ft232 to the servo driver bord. For the speed of the 232 i have no idee.
    When i ask the status in the tuner program i have alway "no respons" Have you any hints ?
    Thank you in advance

Page 14 of 14 4121314

Similar Threads

  1. Servo module for UHU based drives now available.
    By H.O in forum UHU Servo Controllers
    Replies: 1
    Last Post: 01-24-2022, 03:11 PM
  2. Servo drive with ATMEGA
    By mcm_xyz in forum Servo Motors / Drives
    Replies: 1
    Last Post: 12-15-2014, 01:12 AM
  3. Suggestions on New VSD-Core Based Mains Powered Drive
    By Adamj12b in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 4
    Last Post: 05-05-2009, 08:28 PM
  4. Pic based servo motor drive
    By ahmedrehan in forum PIC Programing / Design
    Replies: 7
    Last Post: 08-08-2007, 01:08 AM
  5. I need help on PC-based for servo control
    By NASR1 in forum Servo Motors / Drives
    Replies: 1
    Last Post: 08-14-2006, 09:43 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •