584,814 active members*
5,303 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > SprutCAM > Looking for a Sprutcam license
Results 1 to 19 of 19
  1. #1
    Join Date
    Dec 2014
    Posts
    2

    Looking for a Sprutcam license

    I am looking to purchase a license of Sprutcam. I use Sprutcam at work and have become very familiar with it. I recently picked up a CNC mill for my home hobby projects and have been doing some trials of lower priced CAM solutions for my at-home use. I haven't found one that I feel is comparable for a more affordable price than Sprutcam and am therefore trying as hard as possible to obtain a copy while staying within my limited budget. I have read the Sprutcam license agreement and it doesn't seem that selling a used dongle to someone is illegal but correct me if I am wrong. To keep the price low, I am willing to work with older versions that someone may have and be willing to sell. Specifically, I am looking for a version that includes 3 axis milling strategies. It may be a long shot but does anyone have a license dongle that they would be willing to sell? Thanks in advance for the consideration.

  2. #2
    Join Date
    Jun 2014
    Posts
    1777

    Re: Looking for a Sprutcam license

    I have only seen 2 of these for sale on the forums in the last 3 years, they do come up but not often.
    mike sr

  3. #3
    Join Date
    Jun 2006
    Posts
    3063

    Re: Looking for a Sprutcam license

    And it's probably not legal to sell an older version dongle if the owner has upgraded to a newer version. If the OP is in the States, just contact Jake at SprutCAMAmerica and ask him for the legailities of purchasing a used dongle.

    Mike

  4. #4
    Join Date
    Sep 2007
    Posts
    36
    If you research the legality, I have a SC8 license that I way be willing to part with.

  5. #5
    Join Date
    Aug 2009
    Posts
    106

    Re: Looking for a Sprutcam license

    Hello,

    I purchased my SprutCAM license from a member of this forum. Once I had the key in my possession, I contacted Tormach to transfer the license to me. All is well, and I just upgraded that license to version 9.

    You might want to get verification that they are a valid license holder first, maybe ask Tormach? I had him send me a photo of the key and disk, at least to ensure he had them in his possession.
    --Bryan

  6. #6
    Join Date
    Sep 2007
    Posts
    36
    I owned two licenses of SC8 allpost. I have since upgraded one to SC9 leaving me with one fully licensed SC8 allpost. If it is allowed I would most likely be willing to transfer you my remaining SC8 license since I can take my SC9 dongle home with me if I want to work out of the office.

  7. #7
    Join Date
    Jan 2012
    Posts
    28

    Re: Looking for a Sprutcam license

    Have you sold this?

  8. #8
    Join Date
    Sep 2007
    Posts
    36
    Quote Originally Posted by hollisin View Post
    Have you sold this?
    Yes. It has been sold.

  9. #9
    Join Date
    Oct 2013
    Posts
    47

    Re: Looking for a Sprutcam license

    I am selling my SprutCAM 8 license. If you are interested, PM me

  10. #10
    Join Date
    Aug 2013
    Posts
    980
    Hi Folks,
    I am looking for a backup license to Sprutcam. I am looking for a legitimate copy that I can verify with Sprutcam America per this thread.
    My preference would be SC 10 all-post but will consider down to SC 8
    Or Tormach only.
    Thanks!
    Nathan

    QUOTE=Bryan Turner;1614666]Hello,

    I purchased my SprutCAM license from a member of this forum. Once I had the key in my possession, I contacted Tormach to transfer the license to me. All is well, and I just upgraded that license to version 9.

    You might want to get verification that they are a valid license holder first, maybe ask Tormach? I had him send me a photo of the key and disk, at least to ensure he had them in his possession.
    --Bryan[/QUOTE]

  11. #11
    Join Date
    Aug 2013
    Posts
    980
    I’ve had a couple of offers, anyone else?
    Thanks!

    QUOTE=CadRhino;2206476]Hi Folks,
    I am looking for a backup license to Sprutcam. I am looking for a legitimate copy that I can verify with Sprutcam America per this thread.
    My preference would be SC 10 all-post but will consider down to SC 8
    Or Tormach only.
    Thanks!
    Nathan

    QUOTE=Bryan Turner;1614666]Hello,

    I purchased my SprutCAM license from a member of this forum. Once I had the key in my possession, I contacted Tormach to transfer the license to me. All is well, and I just upgraded that license to version 9.

    You might want to get verification that they are a valid license holder first, maybe ask Tormach? I had him send me a photo of the key and disk, at least to ensure he had them in his possession.
    --Bryan[/QUOTE][/QUOTE]

  12. #12
    Join Date
    Oct 2018
    Posts
    3

    Re: Looking for a Sprutcam license

    My friend had 11.5 license (SN), But I dont know him how to get it.maybe it is not legal version.

  13. #13
    Join Date
    Feb 2019
    Posts
    7
    I had 2 sprutcam 11.0 license files to sell, anyone needs it pls PM me.
    my workshop closed few years.so need to sell these.thanks.
    if everyone has interest pls contact me. my email: joejoelee#yeah.net replace # to @

  14. #14
    Join Date
    Sep 2019
    Posts
    1
    well very simple
    12th - https://yadi.sk/i/_z6i5QRfmQSwlg
    11.5 - https://mega.nz/#!6aBwVAoZ!9HuoYsO0H...mK2RNR-WoKSd00
    also 10.3

    all is cheap

  15. #15
    Join Date
    Sep 2009
    Posts
    5

    Re: Looking for a Sprutcam license

    halo,im look for sprutcam license if somebody have

  16. #16
    Join Date
    Sep 2009
    Posts
    5

    Re: Looking for a Sprutcam license

    hi,
    have you still a sprutcam license ?, i need it for kuka kr150

    best regards

  17. #17
    Join Date
    Feb 2019
    Posts
    7

    Re: Looking for a Sprutcam license

    HI, I had older sprutcam license to sell, pls PM me or email.

    my email: joejoelee#yeah.net replace # to @

  18. #18
    Join Date
    Feb 2019
    Posts
    7

    Re: Looking for a Sprutcam license

    I am selling older sprutcam key/used dongle, pls PM me if you like. or
    e mail me. joejoelee#yeah.net replace # to @

  19. #19
    Join Date
    Feb 2019
    Posts
    7

    Re: Looking for a Sprutcam license

    PLS Contact me if you want to buy older version sprutcam. PM me.
    or send email to me.
    joejoelee#yeah.net replace # to @.

Similar Threads

  1. "SprutCAM License Activation" emails
    By dkaustin in forum SprutCAM
    Replies: 2
    Last Post: 12-12-2014, 09:06 PM
  2. license issue
    By JerryBradley in forum MadCAM
    Replies: 1
    Last Post: 05-06-2013, 07:30 AM
  3. Win a License of CamBam!!!
    By jwolin in forum WoodWorking Topics
    Replies: 0
    Last Post: 12-06-2012, 09:16 PM
  4. Mach3 license
    By 3d GEORGE in forum Mach Mill
    Replies: 11
    Last Post: 12-06-2009, 07:29 PM
  5. Would like to buy an XR2 license
    By bobp in forum OneCNC
    Replies: 9
    Last Post: 06-29-2008, 06:39 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •