584,846 active members*
3,968 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Fanuc > Backup of the machine parameters.
Results 1 to 6 of 6
  1. #1

    Backup of the machine parameters.

    How to perform a backup of the machine parameters. My machine is a Mori Seiki SL-3B ( Fanuc 5T) with BTR.

  2. #2
    Join Date
    May 2014
    Posts
    36

    Re: Backup of the machine parameters.

    I just write mine down on paper , make a few copies and store in different places including the control itself.
    My BTR doesnt allow me to send programs back to the pc so im sure i would be able to send the parameters back either .
    There arnt allot of them anyway so not a major problem just to jot them down.
    Not sure if there is another way .
    My 6t"s i do the same thing .

  3. #3

    Re: Backup of the machine parameters.

    The simplest ways are the best . That too not previously thought about it.

  4. #4

    Re: Backup of the machine parameters.

    These are my machine parameters Mori Seiki -SL-3B Fanuc 5T. It may be useful to someone .

    Attachment 262142 Attachment 262144

    Attachment 262146 Attachment 262148

  5. #5
    Join Date
    Aug 2011
    Posts
    2517

    Re: Backup of the machine parameters.

    Quote Originally Posted by Shottie_gp View Post
    I just write mine down on paper , make a few copies and store in different places including the control itself.
    My BTR doesnt allow me to send programs back to the pc so im sure i would be able to send the parameters back either .
    There arnt allot of them anyway so not a major problem just to jot them down.
    Not sure if there is another way .
    My 6t"s i do the same thing .
    On the 6 series you can punch the parameters....
    select EDIT
    press PARAM button
    type P-9999 then press PUNCH

    it may also work on 5-series. Just try it.

  6. #6
    Join Date
    May 2014
    Posts
    36

    Re: Backup of the machine parameters.

    Quote Originally Posted by fordav11 View Post
    On the 6 series you can punch the parameters....
    select EDIT
    press PARAM button
    type P-9999 then press PUNCH

    it may also work on 5-series. Just try it.

    Thanks Fordav I will certainly give it a bash .
    Just got another 2 lathes with 6t controls(1x6ta and 1x6tb) and need to get the parameters copied and saved .
    This could save me a bunch of time .
    Thanks

Similar Threads

  1. 810M-810T Backup parameters
    By nabil_elbadri in forum SIEMENS -> Sinumerik 810M/810T
    Replies: 10
    Last Post: 12-27-2013, 06:49 PM
  2. How do I backup pc parameters in a fanuc 6
    By jolulank in forum Fanuc
    Replies: 3
    Last Post: 06-01-2012, 05:27 AM
  3. Need to backup parameters on VF2 (USB)
    By jolulank in forum Haas Mills
    Replies: 2
    Last Post: 07-12-2011, 04:19 PM
  4. Replies: 0
    Last Post: 07-22-2010, 02:03 PM
  5. Fanuc 11M Backup Parameters?
    By giantcake in forum Fanuc
    Replies: 0
    Last Post: 07-23-2007, 03:34 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •