585,712 active members*
4,014 visitors online*
Register for free
Login

Thread: Spindle Tool Clamp/Unclamp Alarm

Results 1 to 3 of 3
  1. 10-03-2006, 04:51 PM #1
    Q12321
    Q12321 is offline Registered
    Join Date
    Oct 2006
    Posts
    1

    Spindle Tool Clamp/Unclamp Alarm

    Hi everyone. I've been working on a Daewoo DMV3016 with Fanuc control. After I start up the machine, there is a message saying "Spindle Tool Clamp/Unclamp Alarm." There is no tool in the spindle, nor can I get one in. It also looks like the tool change arm is not in its zero position, but maybe a half an inch outward. Anyone know how to solve this problem?

    Thanks!
    Reply With Quote Reply With Quote
  2. 10-10-2006, 03:20 PM #2
    chipsterns
    chipsterns is offline Registered
    Join Date
    Oct 2006
    Posts
    3
    Get direction from your manufacturer. It sounds like the draw bar needs adjustment or is bad.
    Reply With Quote Reply With Quote
  3. 10-10-2006, 09:24 PM #3
    sertec
    sertec is offline Registered
    Join Date
    Jun 2006
    Posts
    30
    Check Spindle Tool Clamp & Unclamp Proximatey switches. Make sure that only one switch is activated.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules