584,826 active members*
4,934 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Oct 2008
    Posts
    12

    Continental Bandsaw

    Hello,
    We have a Continental 100M horizontal bandsaw that we need to get the drive wheel off of.
    There was a SHCS in the center of the collet looking hub. The diameter of the large thread is bigger than the bore on the wheel.
    Does anyone out there have the secret to taking it off? A parts diagram would really be awesome!
    Thank you very much, Gary

  2. #2
    Join Date
    Oct 2008
    Posts
    12

    Re: Continental Bandsaw

    Attachment 261780

    Saaweeeet!
    The small 8mm bolt was holding the collet into the bore and the large nut was able to pull it out.

Similar Threads

  1. Converting a wood bandsaw to metal bandsaw
    By fatal-exception in forum Uncategorised MetalWorking Machines
    Replies: 7
    Last Post: 04-05-2010, 06:46 PM
  2. Bandsaw
    By jimmy205 in forum Uncategorised MetalWorking Machines
    Replies: 2
    Last Post: 03-15-2008, 10:24 PM
  3. snc bandsaw
    By BeeleJuice in forum Uncategorised MetalWorking Machines
    Replies: 3
    Last Post: 11-05-2005, 07:45 PM
  4. need a bandsaw
    By tekno in forum MetalWork Discussion
    Replies: 6
    Last Post: 08-10-2004, 12:44 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •