I've been having some random issues with my axis' that I have not been able to pin down yet. I can jog around all day and night with no apparent issues, but when I run some g-code one of the motors will stop working. It is usually the slave axis, but I have also had the z-axis stop working. Once I restart Mach3 usually everything works fine again...until I run more g-code. I've ran a few jobs successfully without issue, but most have not been so fortunate. Sometime they stop working at the very beginning of a cut or sometime in the middle.
My setup:
- CNCRP Pro Machine
- Mach3 2010 Screenset
- PMDX-126 BOB
- PMDX-134
- G203V Drivers
- ESS
- Huanyang 2.2kw Spindle & VFD
I've rechecked wiring and everything looks fine. I don't believe it's a mechanical issue (I've put loctite on all my pulleys I swear!), mainly because it jogs fine once Mach3 is restarted. I'm at a loss of what to do at this point, so any help is greatly appreciated. If I can supply any other information or answer any questions to get to the bottom of this, I'm happy to do so!