Has anybody used DMM servos with KFlop and Kanalog? Did you use the DYN2 or 3 servo drives or the SnapAmp?

I am trying to understand what the tradeoffs would be between using the DMM drive (presumably simpler setup, tuning and auto tuning) vs having all the control elements in one system, particularly concerning ridged tapping..

The application is 3 axis for a mill upgrade (http://www.cnc-arena.com/en/forum/ex...e--254025.html). Will likely wind up with the 750W motors (86M-DHT-A672). Cost wise, there does not seem to be a big difference between the various approaches and will still get about 120ipm with SnapAmp or DYN2 on the 750W motors which is probably sporty enough for an old guy...

Thanks,

Bruce