Someone please help me
I am using mastercam mill version 9.1 to write mill program. My 3 holes in drawing placed at X-4.875,Y0; X0Y0; and X4.875,Y0 that turned into X-4.9,Y0; X0Y0; and X4.9,Y0 after NC Utils-Post. It is 0.025 difference for X axis. Please help me to fix it. Tks a lot. tanobao
Results 1 to 1 of 1
-
12-25-2014, 02:11 AM #1
Registered
- Join Date
- Dec 2014
- Posts
- 4
3 Place Decimal in Drawing turn into 1 place decimal in program after NC Utils-Post
Reply With QuoteSimilar Threads
-
Mastercam X, force 4 decimal place output
By critz in forum CNC (Mill / Lathe) Control Software (NC)Replies: 5Last Post: 07-28-2020, 06:41 PM -
Xform > Scale (rounding to the fifth decimal place?)
By rjCousineau in forum MastercamReplies: 2Last Post: 04-11-2013, 10:23 PM -
Mach 3 decimal place.
By underthetire in forum Mach Software (ArtSoft software)Replies: 2Last Post: 04-27-2012, 04:56 PM -
How to prepare a FADAL 3060 to transport form place to place
By Swykore in forum CNC Machining CentersReplies: 0Last Post: 08-08-2011, 01:09 PM -
OM-D decimal place limits
By meadowtech in forum FanucReplies: 4Last Post: 02-20-2009, 08:36 AM
Tags for this Thread
Posting Permissions
