509,882 active members
4,310 visitors online
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Registered
    Join Date
    Jun 2005
    Posts
    8

    integrated stepper/driver

    Has anyone here used integrated stepper/driver or
    stepper/driver/controler systems, such as this one in the link below,
    with cnc software such as Mach3, EMC2, Desknc or any of the others?

    http://www.linengineering.com/site/p...ilverpakC.html

    I would like to have a compact cnc system with as few boxes and cables
    as possible.

  2. #2
    Registered
    Join Date
    Jan 2006
    Posts
    245
    That unit is programable (Has onboard controller) and i dont think will accept clock and direction.
    On top of that the Lin motor is quite expensive, and i would suggest the MDrive from IMS because it is a far better product.
    Have a look at www.imshome.com, the mdrive is a very good product and with the new mdrive plus range you will be very pleased with the smoothness of motion and performance.

    Quote Originally Posted by J Solinger View Post
    Has anyone here used integrated stepper/driver or
    stepper/driver/controler systems, such as this one in the link below,
    with cnc software such as Mach3, EMC2, Desknc or any of the others?

    http://www.linengineering.com/site/p...ilverpakC.html

    I would like to have a compact cnc system with as few boxes and cables
    as possible.
    Motion Control Products Ltd
    www.motioncontrolproducts.co.uk

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •