585,927 active members*
3,547 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > SheetCam > Post Processor Files > Post Processor for Morb Author 213 any one please

Thread: Post Processor for Morb Author 213 any one please

Results 1 to 2 of 2
  1. 01-15-2015, 01:49 AM #1
    auckcabs
    auckcabs is offline Registered
    Join Date
    Aug 2014
    Posts
    13

    Post Processor for Morb Author 213 any one please

    I resurected this old NC and need the post for this...Anyone please
    Reply With Quote Reply With Quote
  2. 01-25-2015, 12:45 AM #2
    Torchhead
    Torchhead is offline Gold Member
    Join Date
    Jul 2005
    Posts
    2415

    Re: Post Processor for Morb Author 213 any one please

    If you have some sample code or (better) and manual with the listing of the G and M codes You can probably find a POST that will work or one that you can modify. The POST language is an open scripting language and there are hundreds of sample POSTS.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Morbidelli Author 344
    By tyretochka in forum CNC Machining Centers
    Replies: 0
    Last Post: 05-19-2012, 06:32 PM
  2. Morbidelli Author 430
    By Scooby Doo in forum Commercial CNC Wood Routers
    Replies: 1
    Last Post: 04-27-2012, 02:32 PM
  3. morbidelli author 504
    By msahin2012 in forum Commercial CNC Wood Routers
    Replies: 0
    Last Post: 05-19-2009, 01:06 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules