I am looking for quotes on a wire forming job. Material is 0.094" 316, passivated after bending. 180 degree bend on one end with 0.128 radius, other end to a 0.100" long sharp point. I have requested clarification on tolerances from the end customer, and for now have included a crude sketch.
Quantities requested are 200, 400, 800 and 1200. Please separate non-recurring and tooling charges from piece part cost.
Thanks
Scott
Thread: Wire forming
Results 1 to 4 of 4
-
10-11-2006, 03:43 AM #1
Registered
- Join Date
- Apr 2005
- Posts
- 345
Wire forming
-
10-12-2006, 03:51 PM #2
Registered
- Join Date
- May 2003
- Posts
- 130
Scott,
You've got mail.
Dale
-
10-19-2006, 09:11 PM #3
Registered
- Join Date
- Oct 2006
- Posts
- 1
[quote=zcases;205555]I am looking for quotes on a wire forming job. Material is 0.094" 316, passivated after bending. 180 degree bend on one end with 0.128 radius, other end to a 0.100" long sharp point. I have requested clarification on tolerances from the end customer, and for now have included a crude sketch.
Quantities requested are 200, 400, 800 and 1200. Please separate non-recurring and tooling charges from piece part cost.
Thanks
Scott[/quote
-
11-16-2006, 11:17 PM #4
Registered
- Join Date
- Nov 2006
- Posts
- 114
zcases
I've sent some quotes to your pm box
Thanks
merl
Reply With Quote
Posting Permissions
