584,866 active members*
5,153 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Cincinnati CNC > T-45 milacron Acramatic 950 programming in MCX7. post or sample code?
Results 1 to 2 of 2
  1. #1
    Join Date
    Nov 2006
    Posts
    303

    T-45 milacron Acramatic 950 programming in MCX7. post or sample code?

    Our dealer does not have squat for a post for this and as much time as will go into getting them info, I might rather edit an existing post if I can find something close.

    This machine has the full 4th on the table like any HMC but has vertical head tilt of 150 deg. Never done this and don't have sample code to look at.

    Anyone have one of these? I think the magnum line might be the same programming wise.

  2. #2
    Join Date
    Dec 2006
    Posts
    584

    Re: T-45 milacron Acramatic 950 programming in MCX7. post or sample code?

    You can contact Master Cam for a post processor on a 950 control. You can also upgrade to V10 and have someone write you a post. Do you have the programming manual that came with the machine ??

    Mike CNC Machine Services INC | Cincinnati Milacron MachinesCNC Machine Services

Similar Threads

  1. CINC MILACRON ACRAMATIC-850 ALIGN PROBLEM
    By keyancnc in forum Cincinnati CNC
    Replies: 1
    Last Post: 08-15-2016, 06:10 AM
  2. CICINNATTI MILACRON - ACRAMATIC 2100 ALARM-APC RACK 0
    By CHANDRU in forum Cincinnati CNC
    Replies: 4
    Last Post: 03-03-2015, 08:35 PM
  3. cincinnati milacron hawk 150 acramatic 2000 control
    By leroy1652 in forum Cincinnati CNC
    Replies: 1
    Last Post: 10-24-2014, 10:15 PM
  4. Replies: 1
    Last Post: 07-15-2013, 10:45 PM
  5. Replies: 3
    Last Post: 09-05-2011, 01:19 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •