If we wish to use a NON standard CPU to communicate with the KFLOP motion controller, ; is the communication protocol published ?
If we wish to use a NON standard CPU to communicate with the KFLOP motion controller, ; is the communication protocol published ?
Hi agareau,
Could you be more specific what you have in mind?
The communication between the PC Host and KFLOP is basically ASCII Script commands as listed here:
Commands
or
Script Commands
These are basically ASCII streams over USB or a Serial UART. The source code we use on the PC is all included in our download.
Regards
TK
http://dynomotion.com
Thank you, Tom