[bigmark1972]

I have looked absolutely everywhere and cant find a manual for my Richmill c5c indexer the control is a Richmill cnc 300




If anyone can help I will be happy to pay for a copy, etc....

[BMackinnon]

The last shop I was at had that same model and manual, I rememeber looking thru it. I contacted them but they sold it to a CO. in Maine.

I looked around on the net too .. couldnt find a thing.
Hope ya get your hands on one.

[GeorgeR]

Are you still looking for a manual - I just picked one up myself and have a manual for mine. I don't have a scanner, but I could probably take a photo of each page if you like (I've got a decent digital SLR).

[Bullet605]

I am also looking for a manual for Richmill Cnc 30 indexer if anyone could come up with an extra copy

I would also be willing to pay for a copy

[GeorgeR]

I've put a pdf of my manual on our website - you can get it at:
http://www.farmmap.co.nz/software/richmill.pdf

[Dave1]

Do you people still need a manual for a Richmill CNC 30?? I finally got my hands on one in PDF format.
PM me with your email if you'd like it.
Dave

[Niezingerley]

Hello. I ahve a Richmill CNC 30 4th axis indexer, and saw that you have a pdf of a manual for a Richmill controller. Is it possible that I could get a copy of that, please?

Thanks for your time.

[Dave1]

Hello. I ahve a Richmill CNC 30 4th axis indexer, and saw that you have a pdf of a manual for a Richmill controller. Is it possible that I could get a copy of that, please?

Thanks for your time.

Can't send it if I don't have an email addy
Will get it out pronto when I have the address.
Dave

[Niezingerley]

Thanks for the response. Here is the e-mail....

[email protected]

Let me know what you would like for the copy of this pdf file...

Thanks again...

[Dave1]

Hehe, well, a million dollars would be nice:stickpoke
Hope it works for ya:cheers:
Dave

[JackP42]

Hi Dave,

If you still have it the pdf Richmill CNC 30 manual available, I would greatly appriciate a copy. I have sent you a personal message with my email address.
Thanks in advance.

Jack

[erniel]

Do you have a pdf file for a Richmill CNC 30 I could get a copy of? I mostly need it for the wire diagram. The whole thing be a blessing.
Thanks,
E

[Dave1]

Do you have a pdf file for a Richmill CNC 30 I could get a copy of? I mostly need it for the wire diagram. The whole thing be a blessing.
Thanks,
E

Yes I do, need email addy and I can send it.
Dave

[erniel]

Thank you in advance.
Ernie Lussi
[email protected]

[Dave1]

Email sent.

Dave

[erniel]

Sorry, I just noticed that my email was wrong.
it is [email protected]. I forgot the r.
Ernie

[Dave1]

Resent

Dave

[henriusa]

Hello Dave.
I have a Richmill CNC 30 -5c indexer without manual nor wiring diagram.
Is it possible that I could get a copy of pdf manual, please?
Best regards,
Henri
[email protected]

[misterjoe50]

Hello
I have a problem a CNC Richmill 300.
I would need an electric plan.
[email protected] mail add
Thanks for hers strive.
Greeting of Austria

[Theldios]

I can use the manuel for Richmill CNC-30 indexer if anyone still has it

[email protected]

thank you very much