I want to cut some 3mm acrylic but don't have any 0 flute bits to cut it with.
i have tried with various bits but it always comes out rough.
all I can find on eBay is 2 flute endmills and even they are in china.
thanks for any help.
paul.
I want to cut some 3mm acrylic but don't have any 0 flute bits to cut it with.
i have tried with various bits but it always comes out rough.
all I can find on eBay is 2 flute endmills and even they are in china.
thanks for any help.
paul.