[SCG]

Hi all I am looking for some help I am posting a program from Featurecam for a old 1996 miti FX wire and the first few lines read as-
;
L/0001;
(MITSUBISHI-WIRE-EDM-3-PLACE-OUTPUT);
H01=0.3;
G62X0Y0;
G97X0;
G71;
G90;
G92X0Y-36000;
N10Z1=0.;
N15Z2=-12.5;
N20Z5=0.;
N25M20;
N30E0F0.; ****************LOOK HERE************
N35M78M78;
N40M80;
N45M82;

There are no epack settings posted out? how do you insert them is it as easy as just inserting the number in to that line? Keep it simple ppl please

[arturomng]

no, you need load the epack for floppy or rs232, and after the machine admit this tecnology

[arturomng]

iam use a fx10k and have some floppy disks, if you need some floppys disk, i can sent for e-mail, because are very very light files

[leorme]

If are for FX20 too?, i need the E-PACK'S,(is one floppy disk only)
i have one but dont work (files corrupted)

[Armando2442]

Did you got the e-pack disk?
I have it and can give you a copy. Where are you located?
I am in north Los Angeles

[leorme]

Did you got the e-pack disk?
I have it and can give you a copy. Where are you located?
I am in north Los Angeles

i am in cd juarez mex.but you can send me the floppy data for e-mail,
[email protected] in advance,by the way....do you know
why the fx20 dont want to burn,maybe the wire need hi-voltage,or there are
some parameter to do that,let me know if you knew someting..ok my friend

[leorme]

iam use a fx10k and have some floppy disks, if you need some floppys disk, i can sent for e-mail, because are very very light files

ok,i need the E-PACK floppy for fx20,can you send me a copy to [email protected] in advance

[mgbuck34]

ok,i need the E-PACK floppy for fx20,can you send me a copy to [email protected] in advance

We also just got an older FX10 I would love to get a copy. I would settle for steel in .010 wire . Thanks, Michael

[hermle_01]

i am in celaya gto mex.but you can send me the floppy data for e-mail,
[email protected] in advance

[Gonz818]

Please share the e packs for my fx 10
[email protected]