We have a Daewoo Puma 230 MS the power went off and back on and now it will not change tools. I tried to set the servo drive in the back but I have never done this before. (NEED HELP)...
We have a Daewoo Puma 230 MS the power went off and back on and now it will not change tools. I tried to set the servo drive in the back but I have never done this before. (NEED HELP)...
Call Doosan to discuss.
My number is 973-618-2461
My name is Darryl. I am in the office today.
Doosan Service Technician
[email protected] O:973-618-2461 M:973-803-9479
He had a 2047 alarm.
Here is the procedure...
Doosan Service Technician
[email protected] O:973-618-2461 M:973-803-9479
He then had a 2023 Alarm.
Here is the procedure...
Doosan Service Technician
[email protected] O:973-618-2461 M:973-803-9479
Hi Darry,
can you please help me, i am using PUMA 230MS 18I FANUC CONTROL, i am not able to do Tool Indexing . from some dayz my hydraulic motor do not get ON in the morning or after break of 2 to three hour, i used to unplugged the solenoid valve and the motor used to get started but now motor is ON machine is referenced but not able to tool index .
please help me .
I am at a customer's. In the field. I will be back in the office next week (hopefully). Where we have the relevant information I would need to assist. (As I've never seen a hydraulic turret, so I have no info in my head)
Doosan Service Technician
[email protected] O:973-618-2461 M:973-803-9479