584,854 active members*
4,335 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Oct 2006
    Posts
    1

    G & M Code on a Gerber Dimension 200

    I've just plunged into the CNC world by picking up a 10 year old Gerber Dimension 200 CNC Router, but I don't have the propriety Artpath software to run it. Has anyone done a conversion to allow it to use G & M code? Or does anyone have the controller schematics?

  2. #2
    Join Date
    Jun 2012
    Posts
    0

    Gerber Dimension 200 conversion

    Hi All,

    I am new to this but just acquire a used gerber dimension 200x router. I have taken everything a part and about to completed my conversion to ECM2. The biggest problem I have run is the set up for the leadscrew pitch in ECM2 axis configuration. I need this parameter to complete my conversion but haven't been able to find the TPI for the leadscrews. If their is a way to figure out the leadscrew pitch please let me know or if you know the leadscrew pitch for the different axis. Thanks!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •