I purchased a 3020 machine off Ebay. One of those chinese made ones. I was able to set it up and install Mach3/Cut2d/Lazy Cam on a dedicated computer.
I am able to get the machine to respond to the manual key commands. My questions are as follows:
How do I set the table size and home position? When I send it home all the AXIS go beyond their limits I do not have home switches.
How do I load one of the sample files from cut2d into geode and publish in mach3? Then how to change the home position for the Job.
I appreciate everyones help. I have been looking at CNC for over 10 years and finally jumped in. I am getting frustrated and don't want to give up.
Thanks,
Evan