585,717 active members*
3,863 visitors online*
Register for free
Login
IndustryArena Forum > Laser Engraving and Cutting Machines > Laser Control Software > LaserCut > Need Help!! We've blocked our Laser Controler leetro mpc6525.

Thread: Need Help!! We've blocked our Laser Controler leetro mpc6525.

Results 1 to 2 of 2
  1. 02-25-2015, 07:20 PM #1
    lucian_moscaliu
    lucian_moscaliu is offline Registered
    Join Date
    Feb 2015
    Posts
    1

    Need Help!! We've blocked our Laser Controler leetro mpc6525.

    We have installed LaserCut 6.0 ( We have used LaserCut 5.3 before ) and after that The Laser System is not initialising anymore, and the laser head is blocked.

    We tried to reinstall LaserCut 5.3 but I think we upgraded the controller with the wrong Firmware or we have installed the wrong driver.

    Can somebodyHelp??

    Thank You!!
    Reply With Quote Reply With Quote
  2. 03-18-2015, 07:44 AM #2
    rayscott
    rayscott is offline Registered
    Join Date
    Apr 2006
    Posts
    108

    Re: Need Help!! We've blocked our Laser Controler leetro mpc6525.

    I would recommend that you try to re-install the firmware. You can find the firmware on the server of RabbitLaserUSA.com web site.. You need to check the section for software and drivers.. then open the link to the directory of software and drivers... then find the firmwares.. then select the appropriate controller or firmware versions.

    here is a direct link.. if cncZone allows it to be posted.

    http://www.rabbitlaserusa.com/Driver...ares/V4.3.0.0/
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. PLEASE HELP IF YOU CAN!!!!! Leetro MPC6525
    By TheWorkshopGuy in forum Laser Engraving / Cutting Machine General Topics
    Replies: 10
    Last Post: 11-09-2020, 06:37 AM
  2. CO2 Laser with Leetro 6515 - Software problems
    By crocketman in forum Laser Engraving / Cutting Machine General Topics
    Replies: 38
    Last Post: 09-14-2017, 07:16 PM
  3. Convert WK Laser LC1290 leetro to AWC608 - Vic, Aus
    By wolfau in forum Laser Engraving / Cutting Machine General Topics
    Replies: 2
    Last Post: 03-25-2014, 12:20 AM
  4. Installing a Leetro mpc6525(6515)" USB controller
    By TheWorkshopGuy in forum Laser Engraving / Cutting Machine General Topics
    Replies: 0
    Last Post: 08-08-2013, 04:34 PM
  5. Is there a way to upgrade the memory on a Leetro controler?
    By phylo in forum Laser Engraving / Cutting Machine General Topics
    Replies: 8
    Last Post: 05-03-2013, 12:38 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules