[mike2768]

It's alive, still need spindle
New Cnc router (mini raptor) - YouTube

[mike2768]

I've attached a link for YouTube. The video is from my mach3 driver test. The computer I was using has an attitude regarding turning on. So I thought I would try my other PC but the machine would run very choppy and not smooth at all any help would be great. I'm running XP.

Mach3 driver test - YouTube
.

[gio666]

I've attached a link for YouTube. The video is from my mach3 driver test. The computer I was using has an attitude regarding turning on. So I thought I would try my other PC but the machine would run very choppy and not smooth at all any help would be great. I'm running XP.

Mach3 driver test - YouTube
.

Choppy and growling sound you had before is from parallel port , Have to check mac address on port or just get uc100 and not have port problem no more

[Gilmax]

Nice Enclosure. What size extrusion did you use for it? Does rock around at all in use? I want to build one for one of my machines.

[mike2768]

I used the 1515 (1.5"X1.5") extrusion

[mike2768]

Here's the mini Raptor making chips, slower parts are it ramping down at 20 ipm then goes to 60ipm

Cnc router, mini raptor - YouTube