Step Resolution Question
OK guys, I have been pathpiloting this weekend and there is one item which is puzzling me.
When I installed Path Pilot, the install asked me which machine I had. I specified Series II with a larger than 1400 Serial number without the Series III upgrade.
I am under the impression this should mean my steppers can move as little as 0.0005 inches. However, when I am at PP, the smallest step size is 0.0001" instead of 0.0005". In fact, there is no 0.0005" option. What am I missing here?
The weird thing is that my machine does move 0.0001" per step, which is weird as I thought the bipolar steppers and the leadshine drives were not capable of this resolution.
I document my CNC Experience at CNC Dude's Youtube channel. Check it out!