Got off the phone a while ago with Cory from CNCRP. Got lots of helpful info but once the call was done I realized I did not ask the proper size needed for the tabletop to support a 4x4 PRO. What is the ideal size?
Got off the phone a while ago with Cory from CNCRP. Got lots of helpful info but once the call was done I realized I did not ask the proper size needed for the tabletop to support a 4x4 PRO. What is the ideal size?
Hey cstmwrks,
It was good talking with you this morning. The ideal base size for a PRO4848 system would be 49" x 63" The V-Con system attaches to both sides of the extrusion rails so making sure the base is no wider than 49" is very important. The 63" dimension could be extended if you wanted to make a shelf/work surface on that side of the system. Here are a couple of good examples from our customers:Attachment 271620Attachment 271622
Cory
CNC Router Parts