Hello,
Leadwell VMC – 25 CNC milling machine with a Mitsubishi FCA 50M within.
I can't get anything to function, screen says ”MO1 operational error”.
The EMG plug/socket on the controller has been checked and gets its signal ok
Any suggestions?
Hello,
Leadwell VMC – 25 CNC milling machine with a Mitsubishi FCA 50M within.
I can't get anything to function, screen says ”MO1 operational error”.
The EMG plug/socket on the controller has been checked and gets its signal ok
Any suggestions?
This is not the complete alarm. Check the alarm page for the actual Operation Error code.