584,849 active members*
4,416 visitors online*
Register for free
Login
IndustryArena Forum > CNC Electronics > Hobbycnc (Products) > CNC Driver circuit for Mech3
Results 1 to 5 of 5
  1. #1
    Join Date
    Feb 2015
    Posts
    13

    CNC Driver circuit for Mech3

    Hi friends,

    I'm beginner for CNC world.I'm trying to build hobby 3 axis CNC machine.
    I have decided to use Mach3 for controlling my CNC.
    Anyone give me suitable breakout circuit diagram for Mach3.

    Thank in advance

  2. #2
    Join Date
    Feb 2015
    Posts
    13

    Re: CNC Driver circuit for Mech3

    I found a diagram.Is this suitable for my CNC?

    PBX-RF - PROBOTIX :: wiki

  3. #3
    Join Date
    Oct 2012
    Posts
    4

    Re: CNC Driver circuit for Mech3

    The Probotix PBX-RF will work fine with Mach 3 and LinuxCNC

  4. #4
    Join Date
    Mar 2009
    Posts
    533

    Re: CNC Driver circuit for Mech3

    Quote Originally Posted by NskNsk View Post
    I found a diagram.Is this suitable for my CNC?

    PBX-RF - PROBOTIX :: wiki
    Depends how you approach your design. If you were to buy a Gecko G540, then this breakout board is not required.
    I would start with the CNC mechanical system first. That should dictate what motor sizes you will need. Then look for a motor controller that can properly drive those motors. The controller selection will let you know if you need the breakout box. You may end up with a USB, or an Ethernet controller. Then decide what power supply size you will need, etc. Once you know all the components required for your CNC, only then start to look for the said items.

    If you randomly buy pieces in the wrong order you may end up with items that don't work properly together.

  5. #5
    Join Date
    Feb 2015
    Posts
    13

    Re: CNC Driver circuit for Mech3

    Is there any parallel port break out circuit diagram that can I use for Mach3?

Similar Threads

  1. Parallel L298N driver circuit help
    By Sidco7 in forum Stepper Motors / Drives
    Replies: 12
    Last Post: 03-01-2011, 04:56 AM
  2. DC dervo driver circuit
    By Heinnex in forum Community Club House
    Replies: 0
    Last Post: 11-04-2009, 11:18 AM
  3. Who has used Tom McWires driver circuit?
    By technovative in forum Open Source Controller Boards
    Replies: 2
    Last Post: 08-02-2009, 05:08 PM
  4. need help Differential Driver/Receiver circuit
    By markus_detroy in forum Servo Motors / Drives
    Replies: 9
    Last Post: 04-18-2008, 03:02 AM
  5. stepper driver circuit.. comments?
    By integerspin in forum Stepper Motors / Drives
    Replies: 0
    Last Post: 09-22-2007, 04:27 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •