584,808 active members*
5,139 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Daewoo/Doosan > Doosan Tech-Docs and Service Bulletins
Page 2 of 2 12
Results 21 to 33 of 33
  1. #21
    Join Date
    Feb 2013
    Posts
    788

    Re: Doosan Tech-Docs and Service Bulletins

    This applies to Doosan MX machine.

    For the care and maintenance of the Sandvik Coromant Capto tool holding system:

    Note: The attached also has part numbers for the specialty tools needed when working on this unit.
    Attached Thumbnails Attached Thumbnails tec2008-20.pdf  
    Doosan Service Technician
    [email protected] O:973-618-2461 M:973-803-9479

  2. #22
    Join Date
    Feb 2013
    Posts
    788

    Re: Doosan Tech-Docs and Service Bulletins

    This applies to the Newer Doosan MX Series

    MX2100
    MX2600
    MX3100

    The ATC Recovery procedure:
    Doosan Service Technician
    [email protected] O:973-618-2461 M:973-803-9479

  3. #23
    Join Date
    Feb 2013
    Posts
    788

    Re: Doosan Tech-Docs and Service Bulletins

    Flow chart for regular turret maintenance
    Doosan Service Technician
    [email protected] O:973-618-2461 M:973-803-9479

  4. #24
    Join Date
    Feb 2013
    Posts
    788

    Re: Doosan Tech-Docs and Service Bulletins

    APC 300 Alarm on a lathe

    How to reference home with an Absolute Position Coder (APC)
    Attached Thumbnails Attached Thumbnails tec007-03.pdf  
    Doosan Service Technician
    [email protected] O:973-618-2461 M:973-803-9479

  5. #25
    Join Date
    Feb 2013
    Posts
    788

    Re: Doosan Tech-Docs and Service Bulletins

    To address the Periodic Maintenance Alarm

    tec2008-30.pdf shows how to clear the alarm

    tec2008-46.pdf shows how to set/change the times and add/remove line items
    Attached Thumbnails Attached Thumbnails tec2008-30.pdf   tec2008-46.pdf  
    Doosan Service Technician
    [email protected] O:973-618-2461 M:973-803-9479

  6. #26
    Join Date
    Feb 2013
    Posts
    788

    Re: Doosan Tech-Docs and Service Bulletins

    B-Axis overhaul for an Old Style MX

    MX2000
    MX2500
    Attached Thumbnails Attached Thumbnails tec007-16.pdf  
    Doosan Service Technician
    [email protected] O:973-618-2461 M:973-803-9479

  7. #27
    Join Date
    Feb 2013
    Posts
    788

    Re: Doosan Tech-Docs and Service Bulletins

    How to Reset the Home position on ANY Doosan Machine.

    (Note: for the exact numbers for your exact machine, you will need the Instruction Manual (AKA: maintenance and specification manual)

    This procedure shows how to gather all needed information and apply it correctly based on what hardware the machine has and the reason why the "Reset of Home" is needing to be done.
    Attached Thumbnails Attached Thumbnails Machine reference recovery_All Forms_Addended.pdf  
    Doosan Service Technician
    [email protected] O:973-618-2461 M:973-803-9479

  8. #28
    Join Date
    Feb 2013
    Posts
    788

    Re: Doosan Tech-Docs and Service Bulletins

    How to maintain and calibrate the Q-Setter on an Lynx 220:
    Doosan Service Technician
    [email protected] O:973-618-2461 M:973-803-9479

  9. #29
    Join Date
    Feb 2013
    Posts
    788

    Re: Doosan Tech-Docs and Service Bulletins

    I don't know how else to answer your PM: as it won't let me...So I'll try this reply to something that you posted.

    In this thread is the "How to reference any Doosan machine"

    Call 973-618-2461 if you need to discuss further.
    Doosan Service Technician
    [email protected] O:973-618-2461 M:973-803-9479

  10. #30
    Join Date
    Feb 2013
    Posts
    788

    Re: Doosan Tech-Docs and Service Bulletins

    Quote Originally Posted by Michael82
    whats ur email I checked my settings and they r all good it says I can get pm from everyone

    [email protected]
    It is in the footer of every post I have...

    ...and you have emailed me before...
    Doosan Service Technician
    [email protected] O:973-618-2461 M:973-803-9479

  11. #31

    Re: Doosan Tech-Docs and Service Bulletins

    Where can I find the procedure for replacing the clamp/unclamp solenoid on a Doosan LYNX 220 LM

  12. #32
    Join Date
    Feb 2013
    Posts
    788

    Re: Doosan Tech-Docs and Service Bulletins

    Quote Originally Posted by Maint_Tech View Post
    Where can I find the procedure for replacing the clamp/unclamp solenoid on a Doosan LYNX 220 LM
    If you meant cylinder then this:
    Attachment 429802

    if you are asking for a procedure for "replacing the...solenoid" they don't exist within Doosan...

    Here goes:

    1. Verify the replacement is correct.
    2. Take pictures and/or mark connections of previous unit.
    3. Remove previous unit.
    4. Install replacement unit.
    5. Verify the connections are correct.
    Doosan Service Technician
    [email protected] O:973-618-2461 M:973-803-9479

  13. #33
    Join Date
    Feb 2013
    Posts
    788

    Re: Doosan Tech-Docs and Service Bulletins

    How to adjust reference position for the Power Mate Manager controlled ATC and Magazine of a Doosan MX machine:
    Attached Files Attached Files
    Doosan Service Technician
    [email protected] O:973-618-2461 M:973-803-9479

Page 2 of 2 12

Similar Threads

  1. Replies: 178
    Last Post: 03-12-2024, 04:35 PM
  2. Doosan Daewoo ForkLift Service Manual
    By VikingCAD13 in forum Daewoo/Doosan
    Replies: 2
    Last Post: 07-02-2012, 06:52 PM
  3. Looking for a certain HAAS service tech
    By force2eng in forum Haas Mills
    Replies: 5
    Last Post: 03-07-2009, 12:31 AM
  4. Need a service Tech
    By NSC-CDN in forum Canadian Club House
    Replies: 3
    Last Post: 02-14-2009, 09:08 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •