Hi all,
I've a project with some parts that need to be made from 304 stainless. Other main requirements are threading the main parts together (ring and plate - used 3 1/4"-16 UN as standard thread size), and a couple NPT tapped holes (1/8" and 1/4"). A 3rd small part is separate, just a couple o-ring grooves and a 1/4-20" tapped hole.
Images available here to get an idea of dimensions (everything is in millimeters). Chamfers and Fillets are optional if they will add significantly to the cost. Full perspective images, dimensions, or 3D files are available upon request.
Each set will comprise the 1x Top Plate, 1x Bottom Ring, and 1x Header. Need approximately 20 sets (figured this from material cost using 3/4"x4"x6' bar stock), but a few more or few less could be workable depending on cost.
Attachment 271378
Attachment 271380
Attachment 271382
I'm ready to go on this project for the right price immediately. Thanks!