584,817 active members*
4,810 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Nov 2013
    Posts
    5

    Boxjoint Gadget

    Hello All,

    I have VCarvePro ver 7.5 and have built a gadget. The gadget lays out each side of the box joint on named layers and generates two (2) tool paths, one for each hand (side) of the box joint. I have added a help screen and a PDF to show how to config the material setup.

    Please have a look and let me know your thoughts. I am looking for feedback on what I can add to the gadget.

    Note:
    I have add a mounting system to the end of my mill to hold the material in a vertical position. This will hold the material so that I can mill on the edge or end of the stock.

    I am working on a Dovetail version and should have the first version out in two weeks. let me know if you would like to see that too.

    Have a great day,
    Jim in Houston Texas

  2. #2
    Join Date
    Mar 2019
    Posts
    1

    Re: Boxjoint Gadget

    Thank for the info. i have vcarve pro 7.5 and i cannot find the exe file for box joint anywhere.
    they have it for vrsion 9 but not for 7.5. any hints???
    thanks

Similar Threads

  1. A Very Handy Little Gadget
    By SCzEngrgGroup in forum Novakon
    Replies: 4
    Last Post: 11-28-2014, 07:26 PM
  2. Gadget ideas to move the TL-3 tailstock.
    By TXFred in forum Haas Lathes
    Replies: 7
    Last Post: 08-06-2011, 01:59 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •