For the 3d Sim to work you must have Windows7 Sorry XP.... is DEAD Jim! ;-)
from the FAQs: ModuleWorks Simulation will only operate on Windows 7 or better.
I am having something odd happen. I am finally done w/ the new Centroid based SuperMax mill. Getting into our first hobby project here and I'm getting something new I never encountered before. I run my part simulation ok. I use the mach3 ppr file for now... (other post on which ppr for Centroid is below this one). I have setup my tool in my own toolfile and put into the Mill default. It errors on both.
the Error:
Anytime I attempt to run the new "Simulation" I get the following error:
"There are not suitable Machine tools setups available".
"You need at least one Milling post-processor to generate the simulation data in order to run the Moduleworks CNC Simulation Program"
Yikes-