[the1toyplace]

I have started making custom boxes. Small runs of 25 to 100. I bought a CNC machine with a drag knife (from donektools) to cut the boxes. Now I need a way of using steel rule dies to crease the boxes.

I went to a few local companies and they would make a die for around $400 to $600. This didn’t seem feasible because I will have so many different styles of boxes and I didn’t have a clicker press. This is why I bought the CNC machine with a drag knife. Donektools sells a creasing wheel but I didn’t think it would work well enough.

I currently have this creasing machine like this 19" Scoring Paper Creasing Machine Creaser Scorer Magetic Lock One Year Warranty | eBay

It works well but some times my boxes are a little larger than the creasing area. I was thinking I could create a steel rule die just for creasing. But, I’m not real sure if this is possible and how I would do this. I’ve done a lot of reading about them, however reading and doing are different.

[steel rule die]

The 1 toy place shoot me an email at [email protected] or [email protected] we would love to work with you and I'm sure we can make something more economical for you!

Milwaukee Steel Rule Dies
414-431-1953
Msrdies.com