Hi veverybody.
I have recently purchased a spg mill which is the same as the G070/BF20.
It came with machined motor mounts to convert to cnc
I have purachased Nema 23s for the X and Y axis and a Nema 34 for the Z axis.
I need some help and advice before buying a breakout Board / controller board.
Ebay is full of then and there are odd ones in the shops in the UK
One thing I cant get my head around is the Voltage and Current required by the power supply.
I know electrical and Electronics pretty well but all this leaves me totally lost
Cheers
Neil