[cybot]

Ethernet Smoothsteppers and Mach3 Software. Shipped from Alberta DashX - Products: SmoothStepper Ethernet

400 Watt AC Servo Motor with Drive for 348.00US Shipped from BC Canada from DMM Tech DMM | AC SERVO DRIVE | AC SERVO MOTOR | ROTARY ENCODER

And there is other parts these company's have besides.

[cybot]

If you are looking for 8020 extruded Aluminum You can order it from these places in southern Ontario

CPI Automation Ltd.
5155 Timberlea Blvd
Mississauga, ON L4W 2S3
Canada
Phone: 905-625-4805
Fax: 905-629-8409
E-Mail: [email protected]
URL: CPI Automation Ltd - Hydraulics, Pneumatics, and Control


IPEC Industrial Controls
17-109 Fernstaff Court
Concord, ON L4K 3M1
Canada
Phone: 866-665-7877
Fax: 905-738-6251
E-Mail: [email protected]
URL: IPEC Factory Automation that is Affordable and Safe Home Page

[cybot]

For Electronic part there is Digi-key and with free delivery on orders over $200.00

All prices in Canadian dollars and include duty and brokerage fees.
1-800-344-4539 • Electronic Components Distributor | DigiKey Electronics | Canada Home Page • 218-681-6674 • Fax: 218-681-3380

[mactec54]

cybot

You can also get a lot of parts, & routers form Xzero cnc

XZero CNC Toronto Ontario Canada
[email protected]
XZero CNC Routers
PH 647-717-2487

[cybot]

cybot

You can also get a lot of parts, & routers form Xzero cnc

XZero CNC Toronto Ontario Canada
[email protected]
XZero CNC Routers
PH 647-717-2487

I looked the site over and cannot fine the lists of parts?
I made this for a place for people to put links to parts sites I didn't really mean finished Cnc's Just parts sites
If anyone has just Parts sites Like Power Supply's, Servo drives, Stepper drives, Breakout boards, Limit switches, Electrical panels and panel switches
Please put the like in for others.
This place is a little on the expensive side Motiontek | CNC Plasma Controller KIT | AC Servo Motor | Timing Pulley | Vacuum Pump and more and it does sell full Machines but there is parts list too so your not stuck buying something someone else made. What fun is that?

[mactec54]

I looked the site over and cannot fine the lists of parts?
I made this for a place for people to put links to parts sites I didn't really mean finished Cnc's Just parts sites

Did you contact him before you posted this, obviously not

Xzero sells every parts you want for routers/machine builds, may not be on his site yet, contact him for a list, spindles, ballscrews, linear rails, steper motors, drives, custom extrusions, table tops & much more

[DSpeck]

I have recently come across this site: SNB Aluminum - Online Store - SNB Aluminum Solutions

They advertise on Kijiji, which is where I found them. No experience with them, but some of the parts look interesting.

[cybot]

Yes that is a good place for 20mm linear rails for $159.00 59 inches long with 2 trucks. So for 300+ you can build a 50" high quality X-Axis and for a hundred Dollars more you can get 25mm rails and trucks. You can get the legs for a starter kit for a plasma or router $500.00 and add to it from other open sources.

[Padrino]

Hey guys,
Can you suggest a good place that I can order CNC router bits from within canada. I am particularly looking for a flycutter with inserts to perform nice surfacing finishing/spoilerboards. I found some nice stuff at todaystools but this is based in the USA.
Any direction here would be greatly appreciated.
Cheers

[2ferrous]

Have you tried Busy Bee Tools?

[Al_The_Man]

Princess Auto sell wire, tie wraps, Push buttons and some relays etc, cheap.
Al.