585,758 active members*
4,532 visitors online*
Register for free
Login

Thread: busellato x axis error

Results 1 to 3 of 3
  1. 04-01-2015, 02:20 PM #1
    lon13fcius
    lon13fcius is offline Registered
    Join Date
    Apr 2015
    Posts
    2

    busellato x axis error

    i am working on a busellato optima. i just hired on and they want me to get this thing running. anyhow i found that the plastic coupler was broking on the x axis. we oreder and installed but it still is reading x axis error. the machine was not all the way to a set postion. it will not warm up or run in anyway. how and what do i need to do? thanks again lon
    Reply With Quote Reply With Quote
  2. 04-01-2015, 03:09 PM #2
    lon13fcius
    lon13fcius is offline Registered
    Join Date
    Apr 2015
    Posts
    2

    Re: busellato x axis error

    it also puts out a setup point emergency
    Reply With Quote Reply With Quote
  3. 04-01-2015, 10:24 PM #3
    ger21
    ger21 is offline Community Moderator
    Join Date
    Mar 2003
    Posts
    35538

    Re: busellato x axis error

    Call Busellato and if they can't help you over the phone, get a technician. Those are very complex machines, and if you're not familiar with them, then they can be almost impossible to fix.
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Help! Busellato Jet200 Servo Error
    By Gadungdung in forum CNC Machining Centers
    Replies: 5
    Last Post: 01-06-2023, 12:50 AM
  2. Busellato Jet Rail Plan Error
    By Dave Govier in forum CNC Machining Centers
    Replies: 0
    Last Post: 04-23-2013, 09:09 AM
  3. Busellato Jet 4 - Error 2053
    By ADK in forum CNC Machining Centers
    Replies: 0
    Last Post: 01-17-2013, 01:27 PM
  4. Error 414 Z axis error detect- servo alarm
    By andywids in forum Fanuc
    Replies: 0
    Last Post: 07-09-2009, 04:33 PM
  5. Error 414 Z-axis error detect servo alarm
    By andywids in forum Uncategorised MetalWorking Machines
    Replies: 1
    Last Post: 07-09-2009, 03:56 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules