535,026 active members*
3,978 visitors online*
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Registered
    Join Date
    Apr 2015
    Posts
    2

    busellato x axis error

    i am working on a busellato optima. i just hired on and they want me to get this thing running. anyhow i found that the plastic coupler was broking on the x axis. we oreder and installed but it still is reading x axis error. the machine was not all the way to a set postion. it will not warm up or run in anyway. how and what do i need to do? thanks again lon

  2. #2
    Registered
    Join Date
    Apr 2015
    Posts
    2

    Re: busellato x axis error

    it also puts out a setup point emergency

  3. #3
    Community Moderator ger21's Avatar
    Join Date
    Mar 2003
    Posts
    35279

    Re: busellato x axis error

    Call Busellato and if they can't help you over the phone, get a technician. Those are very complex machines, and if you're not familiar with them, then they can be almost impossible to fix.
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

Similar Threads

  1. Help! Busellato Jet200 Servo Error
    By Gadungdung in forum CNC Machining Centers
    Replies: 2
    Last Post: 12-28-2020, 01:12 AM
  2. Busellato Jet Rail Plan Error
    By Dave Govier in forum CNC Machining Centers
    Replies: 0
    Last Post: 04-23-2013, 09:09 AM
  3. Busellato Jet 4 - Error 2053
    By ADK in forum CNC Machining Centers
    Replies: 0
    Last Post: 01-17-2013, 01:27 PM
  4. Error 414 Z axis error detect- servo alarm
    By andywids in forum Fanuc
    Replies: 0
    Last Post: 07-09-2009, 04:33 PM
  5. Error 414 Z-axis error detect servo alarm
    By andywids in forum Uncategorised MetalWorking Machines
    Replies: 1
    Last Post: 07-09-2009, 03:56 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •