585,962 active members*
4,126 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > BobCad-Cam > over-ride auot peck,,peck,,fast peck crashing preditor backplot
Results 1 to 2 of 2
  1. #1
    Join Date
    Apr 2009
    Posts
    3376

    over-ride auot peck,,peck,,fast peck crashing preditor backplot

    I changed computers a while back,,,and I am crashing preditor as the title says.

    Years ago this was a problem and I cannot remember the fix.

    I go back and forth and compare all settings from old computer to new.

    Everything is the same.

    There is one thing different though,,that is I have V 24 Demo loaded on the old computer.That is the only thing I can think of.

    Anybody remember this problem,,it goes back to V23.

    Wish the old BoB forum was archived,I bet the answer lies there.

  2. #2
    Join Date
    Apr 2009
    Posts
    3376

    Re: over-ride auot peck,,peck,,fast peck crashing preditor backplot

    Corrupt Machine file,fixed

Similar Threads

  1. Combining peck drilling cycle with deep hole peck
    By adams4182 in forum G-Code Programing
    Replies: 3
    Last Post: 07-28-2013, 09:07 PM
  2. tap peck
    By fjbart70 in forum Mastercam
    Replies: 1
    Last Post: 02-18-2011, 02:22 AM
  3. peck drilling?
    By Tristar500 in forum BobCad-Cam
    Replies: 1
    Last Post: 01-20-2010, 08:25 PM
  4. different peck cycles?
    By C5turbo in forum Fanuc
    Replies: 9
    Last Post: 11-06-2008, 12:03 PM
  5. To Peck drill or not to peck dril.....
    By Crashmaster in forum MetalWork Discussion
    Replies: 20
    Last Post: 08-23-2008, 05:33 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •