584,841 active members*
4,684 visitors online*
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Join Date
    Oct 2006
    Posts
    105

    laser cutting acrylic - art application

    I have a Versa Laser at school and have cut acrlylic sheet before. But have any of you tried to cut a poured acrlyic sheeting made from dried acrlyic pastes..which has a softer tendancy. I didn't want to ruin my machine, but I want to try....
    "Craft is What I do All Day. Art is what I have at the end of it" Jean Weller

  2. #2
    Join Date
    Oct 2006
    Posts
    1

    laser cutting acrylic - art application

    The Acrylic material used is very important here. Cast Acrylic is excellently suited to Laser cutting. But it is a pure risk to cut "dried acrylic paste" as the material would become milky after cutting, due to stresses released.

    Dhana,
    emachineshop.com - the online machineshop

  3. #3
    Join Date
    Oct 2006
    Posts
    49
    chip sweeper I doubt is rather imagining than telling what he sees. Not correct answer.
    Chan Luci, Techie
    www.custompartsonline.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •