Does anyone know the parameter nuber that will allow me to change my cut length so i can 241 when it is normally set to 240...without a cut stretcher.
Does anyone know the parameter nuber that will allow me to change my cut length so i can 241 when it is normally set to 240...without a cut stretcher.
did you make any progress jet ?
first thing to do is to get a backup of the flashram.uc file (User Init File) an date it
shift + F2 in motion mechanic
like : 2015-04-10_flashram.uc
this is how I handle al the files I make
open this in notepad or any plain text editor (notepad ++ is my favourite ! )
and look for any number in the order of 240
it could well be param 5 and 9 ( 6 and 10 for Y)
supposing MC is still using the same (main) parameters
X-Axis Negative Stroke 5 F Negative Distance from X-Axis Limit Offset.
X-Axis Table Size 9 F Positve Travel Distance from X-Axis Limit Offset
this is how you enter (you're number) in motion mechanic
3125.000000 9 set_float
( mm's in my case )