I am trying to swap the A-Axis which is slaved to the X-Axis, changing it to B-Axis. I have transferred the settings from A-Axis to B-Axis , changed the A-Axis slaved to X-Axis to B-Axis and restarted the program....will not turn. I am doing this so I can have the A-Axis for the indexer so i can see the visual in Mach3.

I have a pmdx-126 board without the smooth stepper. I have my additional Gecko hooked up to J6 on the pmdx-126 board, pin 1 for step and pin 14 for direction. Do I need to hook up anything to common on the G201X Gecko drive? Any help would be great I am lost.